When your engineer asks you for your estimated design loads because you know drafting and did a 3D model of your dream home.
- Residential minimum design requirements
- Site Plan
- Floors
- Foundation and Roof Plans
- Elevations and Building Sections (minimum two building sections)
- Building Details
- Plumbing Plan (water supply line sizes, gas supply line sizes, water-heating equipment, hot water recirculation pump controls, fixture flow and flush rates)
- Mechanical Plan (equipment type/size, supply/return, outside air ventilation, exhaust fan systems)
- Electrical Plan (lighting, power, load calculation, single line diagram)
- Plans must be readable and to "scale".
- Place all required notes on the drawings.
- Specification books on Single Family Plan checks are not acceptable
- Provide a True North Arrow and an Orientation North Arrow on site plans and floor plans.
- Exits and Emergency Escapes
- Light, Ventilation and Sanitation
- Yards and Courts
- Sanitation
- Room Dimensions
- Smoke Detectors
- Heating
- Attached Garages
- Attached Carports
- Stairways And Landings
- Handrails
- Detached Garages And Accessory Buildings
Workshop Categories (MATH Help):
Calculating Structure weights and loads
Weights of Building Materials
- Roofing
- Wood shingles = 3.0 psf
- Asphalt shingles = 2.5 psf
- Wood shakes = 6.0 psf
- Clay tile = 9.0 to 14.0 psf
- Materials
- 5/8" plywood = 1.8 psf
- 3/4" plywood = 2.3 psf
- 1 1/8" plywood = 3.4 psf
- 2" (nom.) decking = 4.3 psf
- 1" (nom.) hardwood floor = 4.0 psf
- Linoleum = 1.5 psf
- 3/4" ceramic tile or quarry tile = 10.0 psf
- 3/4" gypcrete = 6.5 psf
- 1/2" gypsum board = 2.2 psf
- 5/8" gypsum board = 2.8 psf
- Plaster (1" thick) = 8.0 psf
- Acoustical tile = 1.0 psf
- 1" Cement plaster = 12.0 psf
- 1" Rigid fiberglass = 1.5 psf
- 1" Glass wool = 0.3 psf
Douglas Fir Members Weights In Pounds Per Square Foot
|
Spacing (inches) |
Sizes |
12" centers |
16" centers |
19.2" Centers |
24" centers |
|
|
|
|
|
2 x 4 |
1.4 |
1.1 |
|
0.7 |
2 x 6 |
2.2 |
1.7 |
|
1.1 |
2 x 8 |
2.9 |
2.2 |
|
1.5 |
2 x 10 |
3.7 |
2.8 |
|
1.9 |
2 x 12 |
4.4 |
3.3 |
|
2.2 |
3 x 6 |
2.4 plf |
|
|
|
4 x 4 |
3.2 plf |
|
|
|
4 x 6 |
5.0 plf |
|
|
|
4 x 8 |
6.8 plf |
|
|
|
4 x 10 |
8.6 plf |
|
|
|
4 x 12 |
10.4 plf |
|
|
|
|